Categories
Contact Us

Email:jp004@jp-balancer.com

Tel: +86-21-39972151

Fax:+86-21-39972968

QQ: 2881090407

WhatsApp: +86-13817256095

Skype:shjpphj

Website: www.jp-balancer.com


Shanghai Jianping Dynamic Balancing Machine Manufacturing Co., Ltd.

Add: No.2151,Panchuan Road,Luojing Town,Baoshan District,Shanghai. China.


Service Hotline
+86-21-39972151

News

Home > NewsContent

The Most Basic Steps To Check The Balancing Machine

  The most basic steps to check the balancing machine

  There are many factors that cause the balancing machine to fail or fail to achieve equilibrium. Some are the reasons for balancing the workpiece, and some of the reasons for the machine itself. Therefore, before the balancing machine works, the machine is checked against the machine, In order to effectively control and the occurrence of mechanical failure.

  1, the first balance of the rotor can be reached to achieve the highest accuracy, and then prepare a greater than the rotor residual imbalance 30 to 50 times the removable counterweight (the following process by: the use of counterweight weight 100 grams, the rotor residue should be Less than 2 to 3 grams). Rotor and balancing machine connection and loading the same form, directly into the following test process.

  2, check the balance of the various settings are normal.

  3, in the rotor on any side of the specified weight on the circumference of 45 degrees with a known weight can be disassembled with the weight of the counterweight (the following counterweight weight of 100 grams). Start the balancing machine, the balance machine corresponding to the indication should be in the 40-50 degrees, 90-110 grams (90% to the weight rate).

  4, after the shutdown will be removed with the weight of the rotor installed in the same side of the circumference of 135 degrees angle. Start the balancing machine, the balance of the corresponding side of the indication should be in the 130-40 degrees, 90-110 grams (90% to the weight rate).

  5, after the shutdown will be removed with the weight of the rotor in the same side of the circumference of 225 degrees angle. Start the balancing machine, the balance machine corresponding to the indication should be in the 220-230 degrees, 90-110 grams (90% to the weight rate).

  6, after the shutdown will be removed with the weight of the rotor in the same side of the circumference of 315 degrees angle.

  Start the balancing machine, the balance of the corresponding side of the indication should be 310-320 degrees, 90-110 grams (90% to the weight rate).